12V Emergency 900 Amps peak jump starter car power station

The "12V Emergency 900 Amp Peak Starter Car Power Station" you mentioned seems to refer to a car emergency starting power supply. This type of device is usually used to provide temporary power when the car battery is low or the car cannot be started. Here is some general information about this type of product:

1. Voltage: 12V is the standard voltage of car batteries.
2. Peak Current: The peak current of 900 amperes (A) means that the device can provide up to 900A when starting the car, which is sufficient for starting cars.
3. Starter: refers to the main function of the device, which is to start the car.
4. Power Station: may refer to the fact that in addition to starting the car, the device may also have other functions, such as charging electronic devices, providing lighting, etc.

When using this type of device, it is usually necessary to connect the positive (red) and negative (black) connection wires of the device to the corresponding poles of the car battery respectively. Before connecting, make sure the car is turned off and all doors are closed for safety. After starting the car, disconnect as soon as possible to avoid long-term connection causing battery overcharging or other problems.

Please note that when using any type of emergency starting device, you should follow the safety guidelines and operating procedures in the product manual. If you are not familiar with how to operate, it is recommended to seek help from a professional. In addition, regular maintenance of your car battery and checking the battery status are also good ways to avoid the need to use emergency starting devices.